Happy Frizz ZERO Use And Maintenance Manual page 4

Filter, soda maker and refrigerating system for water
Table of Contents

Advertisement

PLACE OF INSTALLATION
WARNING:
Do NOT use the ZERO system unless it is in a vertical position.
DANGER:
use the ZERO system ONLY with tap water. Use of the ZERO system for purposes other than
those indicated may cause serious injury to persons and damage to the device.
WARNING:
use the ZERO system on a flat, stable surface away from heat sources.
DO NOT place the ZERO system on very hot surfaces (for example, on the surface of an oven) and do not
use it near naked flames or in the vicinity of flammable solvents such as alcohol or thinners.
WARNING:
Do not place the machine near flammable solvents such as alcohol or thinners.
WARNING:
Do not install the machine in excessively humid or dusty places, exposed to direct sunlight,
outside or near heat sources.
WARNING:
Installing the machine in these places could cause fire or electric shock.
WARNING:
The device is not suitable for use in open areas.
WARNING:
If in the future you decide to connect the ZERO system to the water supply, all existing pipes,
seals and joints between the machine and the mains water outlet must be replaced with new materials
to avoid contaminations.
The ZERO installation kit is provided. Purchase the original HAPPY FRIZZ kit. Installation with non-
compliant materials and fittings invalidates the product warranty.
E' previsto il kit di installazione ZERO. Acquista il kit originale HAPPY FRIZZ. L'installazione con materiali
e raccorderia non conforme, annulla la garanzia prodotto.
WARNING:
To reduce the risk of damage to property or persons, service or repairs must be carried out
exclusively by an authorised service representative of HappyFrizz®.
WARNING:
Do not pull the power cord to remove the plug from the socket.
WARNING:
Before using the ZERO system, make sure the appliance is not resting on the power cord.
Failure to comply with any safety regulations could result in fire, electric shock or damage to the machine.
POWER SUPPLY
WARNING:
The connection to the electrical network takes place by connecting the plug to a mains socket. The
current socket must be equipped with an efficient earthing socket and must be sized for the appliance load.
ATTENTION:
Before inserting the plug, check that the voltage and frequency values of the electrical power
supply correspond to those indicated in the technical specifications of Happy Frizz ZERO.
Avoid being barefoot when connecting and disconnecting the plug.
WARNING:
Do not place or disconnect the machine from the power outlet with wet hands.
WARNING:
Insert the plug firmly into the wall socket.
WARNING:
Do not damage, modify, stretch, bend or twist the power cord.
Do not place heavy objects on the power cord.
WARNING:
Do not use the machine if the power cord is tied or has knots.
WARNING:
If you notice smoke, unusual smells or strange noises coming from the machine,
immediately unplug the machine from the power outlet and contact the technical assistance servic
Using the machine in these conditions could cause fire or electric shock.
WARNING:
Periodically, unplug the machine from the power outlet and, with a dry cloth, clean the plug
and the socket. If the machine is connected to a place exposed to dust, smoke or high humidity, the
dust accumulated on the socket absorbs moisture and could alter the insulation and start a fire.
WARNING:
Do not spray water on the device, as this may cause electric shock or fire.
6
AVVERTENZA:
The machine must not be installed in areas where a water jet can be generated.
AVVERTENZA:
Use a damp cloth to clean the machine. Do not use flammable solvents.
AVVERTENZA:
Use a damp cloth to clean the machine. Do not use flammable solvents such as alcohol,
benzene, or thinners. If flammable substances come into contact with the electrical components inside
the machine they could cause fire or electric shock.
AVVERTENZA:
Before cleaning the machine, turn it off and unplug it from the power outlet. Failure to
turn off or accidental switching on during cleaning could result in personal injury or machine damage.
AVVERTENZA:
The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or with insufficient experience or knowledge, unless they have
been supervised through the intermediation of a person responsible for their safety or have received
instructions concerning use of the appliance. Children must be supervised to ensure they do not play
with the appliance.
USE OF THE MACHINE
Safety and warnings
Should any unexpected anomaly occur after having powered HAPPY FRIZZ ZERO:
→ Turn off the power by pulling the plug out of the socket.
→ Close the water supply valve (if connected to the water supply).
→ Check if this manual contains information that is sufficient and necessary to release it in complete
safety (see Residual Risks). Alternatively contact technical assistance immediately to receive precise
information.
IMPORTANT:
→ Do not remove any panelling or grid.
→ Do not place objects on the machine.
→ Always lift the machine even for small movements; absolutely avoid pushing it or dragging it.
→ Do not touch it with wet hands or feet.
→ Do not use it when barefoot.
→ Do not use extension cords in places subject to jets or splashes of water.
→ Do not pull the power cord to disconnect it from the mains.
DANGER:
ACCESS TO THE INTERNAL PARTS OF THE MACHINE MUST ONLY BE CARRIED OUT FOR
MAINTENANCE OPERATIONS AND ONLY BY AUTHORISED PERSONNEL WHO HAVEALREADY READ THE
MANUAL..
Before servicing the machine it is necessary to disconnect it from the mains.
IMPORTANT:
→ Do not put your hands, or objects held with your hands inside the device.
→ Do not wet the electrical connections and the internal components with water or other liquids.
→ Maintenance operations must be performed solely and exclusively by following the instructions in the
manual.
7

Advertisement

Table of Contents
loading

Table of Contents