Table of Contents
Advertisement
TABLE OF CONTENTS
DECLARATION OF CONFORMITY ..................................................................... p. 3
MANUFACTURER'S DATA AND AUTHORISED ASSISTANCE ............................. p. 4
IMPORTANT PRECAUTIONS ............................................................................. p. 5
PACK CONTENTS ............................................................................................. p. 9
ZERO SYSTEM OVERVIEW ............................................................................... p. 10
2
FIRST START-UP PROCEDURE ......................................................................... p. 13
HOW TO USE HAPPY FRIZZ ZERO ................................................................... p. 17
O-RING SEALS .............................................................................................. p. 20
KIT FOR SANITISATION/DECALCIFICATION AND FILTER CHANGE .................. p. 21
SANITISATION/DECALCIFICATION PROCEDURE/FILTER CHANGE ................... p. 22
CARBONATION LEVELS AND FIZZY DRINKS PREPARATION ........................... p. 30
MAINTENANCE p. 32
CYLINDER REPLACEMENT .............................................................................. p. 33
RESOLUTION OF PROBLEM ............................................................................. p. 34
.............................................................................................. p. 35
REGULATIONS .............................................................................................. p. 36
.............................................................................................. p. 37
send an e-mail to store@biotechtrentino.it
and request FREE OF CHARGE
the instructions in simplified on-screen
format or use the QR codes indicated below
and view them with your smartphone!
On-screen first activation
On-screen procedure
procedure instructions
instructions sanitisation/
decalcification and filter
On-screen normal use
instructions
change
DECLARATION OF CONFORMITY
GENERAL DESCRIPTION AND TECHNICAL DATA
The product described in this document is a device for dispensing filtered water, at room temperature or
cooled. The water supplied can be carbonated.
The appliance was made with components whose materials comply with the requirements of Regulation
1935/2004 which establishes the general principles of safety and inertia for all MOCAs (materials and
objects in contact with food), of Reg. (CE) 282/2008 relating to recycled plastic materials and objects
intended for contact with food, of Reg. (CE) 10/2011 concerning plastic materials and objects intended to
come into contact with food products, Reg. (EC) 450/2009 concerning active and smart materials intended
to come into contact with food.
The system was built in accordance with good manufacturing practices (Reg. (CE) no.2023/2006)
so that, under normal or foreseeable conditions of use, it does not transfer components to food products in
quantities such as to:
a) constitute a danger to human health;
b) result in an unacceptable change in the composition of food products;
c) lead to a deterioration of their organoleptic characteristics.
Machine dimensions
Width: 210mm
Depth: 420 mm
height: 440 mm
Weight: 9 kg unladen
Power supply
Voltage: 220-240 V A.C.
Frequency: 50-60 Hz
Power: max 80 W
Identification plates
On HAPPY FRIZZ ZERO an identification plate is applied on which are reported identifiers and the main
technical data relating to weights and power supplies.
The feasible operations are those indicated in this manual in the INTENDED USE section.
Everything that is not feasible, as well as partial or total non-compliance with the procedures described in
the manuals, can be the cause not only of errors in the work phase, but also of accidents such as to cause
serious damage to the machine and to its operators.
NOTE:
THE MANUFACTURER CANNOT IN ANY CASE BE CONSIDERED RESPONSIBLE FOR INCIDENTS OR
DAMAGE ARISING FROM THE UNINTENDED AND UNAUTHORISED USES OF HAPPY FRIZZ ZERO.
3
Advertisement
Table of Contents
