Happy Frizz ZERO Use And Maintenance Manual page 13

ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the orange light with the crossed filter symbol remains on and is
intermittent;
> the ambient temperature water icon comes on and is intermittent.
USER ACTIVITY:
> Press the ambient temperature water icon. In this way ZERO starts
the sanitisation procedure. Now the ZERO is ready to start!
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the cold water icon turns on and is intermittent;
USER ACTIVITY:
> Press the cold water icon. In this way the internal tank is emptied.
Ensure the presence of the container.
ATTENTION: ensure the presence of the 3L container.
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the ambient temperature water icon comes on and is intermittent.
USER ACTIVITY:
> Empty the 3L container and then replace it under the water
dispenser;
> Press the ambient temperature water icon. In this way the water
with the sanitiser entered the circuit and the internal tank.
> A small quantity of sanitising water is discharged into the
container (twice, 20 seconds apart). Wait for the red water level
light to come on.
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the red water level light comes on;
USER ACTIVITY:
> Remove the extruded tank, rinse it very well, fill it completely with
tap water and replace it in its seat;
> Empty the 3L container.
> Replace the 3L container.
IMPORTANT PRECAUTION:
> the tank must be well cleaned making sure that no residues remain
inside.
Let's have a coffee and leave the sanitiser act for approximately 25 minutes. Your ZERO will notify you
when you are needed.
24
5
6
7
8
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the cold water icon turns on and is intermittent;
USER ACTIVITY:
> Press the cold water icon. In this way the rinsing procedure is
started and the internal circuits are emptied from the sanitiser.
> ATTENTION: ensure the presence of the 3L container.
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the ambient temperature water icon comes on and is intermittent.
USER ACTIVITY:
> Empty the 3L container and then replace it under the water
dispenser;
> Press the ambient temperature water icon. In this way the rinsing
procedure starts.
> A small quantity of sanitising water is discharged into the
container (twice, 20 seconds apart). Wait for the red water level
light to come on.
ATTENTION: wait for the ambient water icon to go out before removing
the tank, as water may still be coming out.
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the red water level light comes on;
USER ACTIVITY:
> Rinse the external tank very well, fill it with tap water and place it
in its seat again.
> Empty the 3L container and replace it;
Wait 5 minutes until Zero alerts you.
ZERO DISPLAY STATE:
> the magenta button with the cleaning filter symbol remains on;
> the cold water icon turns on and is intermittent;
USER ACTIVITY:
> Press the cold water icon. In this way the water used for the first
rinse is discharged.
25
9
10
11
12