Pipework Connection Diagrams For Cpm-1-70 As Separating Cylinder - Wolf DHW Series Installation Instructions Manual

Pipework connections for the CPM-1-70 as a separating cylinder for air/water heat pump BWL-1,
connection type B
3-way valve
24V AC
Front view
Connection type B applies to the CPM-1-70 as a separating cylinder
If the CPM-1-70 is used as a separating cylinder, the connection pipe for the heat pump return must be installed
on-site. It is included in the standard delivery.
Please note:
The cylinder cannot operate properly as a separating cylinder without the connection pipe for the heat
pump return.
3064300_201703
11. Pipework connections for CPM-1-70
as separating cylinder
Heat pump - flow
DHW - flow
Heat pump - return
DHW- return
Manual air-vent valve
Heating circuit pump
class A
7m or 8m
head
Connection pipe
for heat pump
return
BDF valve
Heating -
flow
Heating -
return
Sensor well
Rear view
15