Using A Wired Remote Control; Connection Example; Setting Projector Id Number To Remote Control - Panasonic PT-DZ6710U Service Manual

PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES

6 Using a Wired Remote Control

6.1.

Connection Example

When multiple projectors are connected as part of the system, connect to units with a M3 stereo mini jack commercial cable to
simultaneously control multiple main units with a single remote control through the REMOTE1 IN/OUT terminal. It is effective to use
the wired remote control in the environment in which an obstacle stands in the light path or where devices are susceptible to outside
light.
6.2.

Setting Projector ID Number to Remote Control

Each projector can be assigned a unique 2 digits ID number, and the remote control 2 digits ID number must be set to match the
intended projector. The default setting of the projector ID is ALL. Set the ID of the projector in advance from the menu items.
Procedure of ID setting
1. Press the ID SET button.
Displays the projector ID number on the screen.
2. Within 5 seconds, enter the same number of the required projector by pressing the numeric buttons.
ID number range: 01 - 64
Note:
· Do not press the ID SET button accidentally or carelessly because the ID number on the remote control can be set even
20