PT-DZ6700U / PT-DZ6700UL WUXGA 6,000 Capturing attention with brilliant pictures and PT-DZ6710U / PT-DZ6710UL WUXGA 6,000 Geometric Adjustment diverse image-rendering capabilities HD/SD-SDI PT-DZ6710U PT-DZ6710UL PT-DZ6700U PT-DZ6700UL Based Projector ™...
HD/SD-SDI Adjustment *The PT-DZ6710UL and PT-DZ6700UL are sold without lenses. The specifications are the same as those of the PT-DZ6710U and PT-DZ6700U. Vivid Picture Quality with High Brightness RGB Booster Significantly Improves Color Reproduction The RGB Booster achieves high image quality with levels of color reproduction (up to 145% that of conventional models) and brightness that make each color stand out.
A host of system functions expand the possibilities for rendering creative images. Geometric Adjustment for Specially Shaped Screens This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using just the remote control, with no external equipment needed.
System Daylight View 2 for Enhanced Color Perception Image details are less clear when a projector is used in a room with the lights on. This problem becomes more significant when images require increasing levels of detail expression. Panasonic's System Daylight View 2 optimizes image quality to improve color perception of the projected image in bright rooms.
Standby Mode: eco* The PT-DZ6710U/DZ6700U has attained a low stand-by power level of 0.2 W, which is a top-class level for the projector industry. It also helps to slash running costs, and reduces environmental impact. * During standby mode eco operation, network functions such as standby-on from a LAN network and the serial output terminal will not operate.
These space requirements also apply to installation where only one projector unit is operating atone time and the other unit is used as a backup. • If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 ˚C (32 ˚F) and 40 ˚C (104 ˚F). Also make sure the projector's intake and exhaust openings are not blocked.