5 External Controls
5.1.
Control through Serial terminal (SERIAL)
SERIAL terminals which are on the side of the projector conform to RS-232C standard. This projector can be controlled by a PC
which is connected as shown below. Also SERIAL OUT terminal is provided to enable plural projector control.
For controlling this projector by a PC, requires communication software on the market, and inputs control commands according to
5.1.3. "Communication Condition (Factory Settings)" and Basic Format (Refer to 5.3. "Control Commands").
5.1.1.
Examples of Connection
5.1.2.
Pin Assignments and Signal Names
5.1.3.
Communication Condition (Factory Settings)
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
15