Table of Contents
Advertisement
2
Safety
Shut down
6/22
Instruction manual
w w w . b a i e r - g m b h . d e
2 Safety
Electric Shock
Danger to life and health due to electrical shock.
Electrical connections have to be installed by approved
personnel only
Switch off power before carrying out work and secure
power against being switched on.
Observe relevant safety instructions.
2.1 Requirements for operation
Hint
Read the instruction manual before performing the initial operation.
2.1.1 Ambient conditions
The 24 V motor control device for flush box mounting is designed for standard wall
jacks in dry interior.
2.2 Proper use
This product is a motor control device for 24V DC motors of the manufacturer. It is
powered by an internal 24V power supply. It allows connection to on site switches
(0 / Open / Close).
The manufacturer's instructions must be observed, in especially maximum and
minimum dimensions and maximum weight of the driven wing.
Any other use of this product is considered inappropriate use.
It is not guaranteed, that this product works with motors or other electronic devices
of other manufacturers.
2.3 Behavior in case of an error
In case of an error, the device must be shut down and the manufacturer must be
informed.
Do not operate device
Disconnect device from power supply
Inform the manufacturer
D A N G E R
24V motor control device for flush box mounting - Version 1.1
Advertisement
Table of Contents
