Dismounting; Dimensions - Baier PROMETHEUS Series Instruction Manual

5
Mounting and electrical connection
Dismount the control
device
10/22
Instruction manual
w w w . b a i e r - g m b h . d e

5.2 Dismounting

 Disconnect main power supply
 Protect against power up
 Safety instructions, refer to chapter 2
 Unplug switch and remove cover
 Remove electrical connections
 Remove both screws
 Take control device out of the flush box
 Control device is dismounted

5.3 Dimensions

The control device including power supply unit needs 34mm in depth.
The dimension of the switch is 55mm each side.
24V motor control device for flush box mounting - Version 1.1