Table of Contents
Advertisement
6
Initial operation
Status LEDs
12/22
Instruction manual
w w w . b a i e r - g m b h . d e
6 Initial operation
When the control device is mounted and electrically connected, the inital operation
must be performed.
The following sections describe the parts of the control device, which are relevant
for the initial operation. The following chapters describe step by step, which
functions must be set up and how the initial operation is done.
Reset key
Configuration switch
Figure 3
-
Control device
configuration elements
top view
24V motor control device for flush box mounting - Version 1.1
+
Potentiometer,
to set the tolerance of
power operated
shutdown
Advertisement
Table of Contents
