Advertisement
10. (Figure 8)
Position the height adjustment handle side to side so that the external teeth washer can fit
between the handle and the height adjustment strap. Tighten the nuts securing the height adjustment
handle.
11. （Figure 9） Assemble the Connecting Rod to the sweeper housing by using two sets of Hex Bolt M6x12
and Lock Nut M6.
© by WilTec Wildanger Technik GmbH
Seite - 8 -
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
