Advertisement
4. (Figure 3) Fasten the hitch tubes together using two M8x65 Hex Bolts and M8 Lock Nuts. Do not
tighten yet.
3
If you tractor hitch 279 to 330 ground clearance refer to figure 4. If your tractor hitch has 203 to 279
ground clearance refer to figure 5.
5. (Figure 4 or 5) Assemble the hitch brackets to the hitch tubes using two M8x50 hex bolts and M8 hex
lock nuts. The bolts should straddle the front hitch tube bolt. Do not tighten yet.
6. At this time tighten the four bolts fastening the hitch tubes to the sweeper housing. Next, tighten the two
bolts fastening the ends of the hitch tubes together. Finally, tighten the two bolts fastening the hitch
brackets to the hitch tubes.
7. (Figure 4 or 5) Assemble the hitch pin, spacers and the hair cotter pin to the hitch brackets.
4
5
© by WilTec Wildanger Technik GmbH
Seite - 6 -
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
