Advertisement
5. (Figure 13) Place the assembled lower hopper tubes into the bottom of the hopper bag.
6. (Figure 13) Attach the ends of the lower hopper side tubes to the inside of the upper side tubes using
two Ø9.5X25 clevis pins inserted from the inside, and two hair cotter pins Ø3.
7. (Figure 14) Insert the bag frame strap into the stitched sleeve along the front edge of the bag bottom.
8. (Figure 14) Assemble the bag frame strap to the lower hopper side tubes using two Ø6X37 clevis
pins and two hair cotter pins Ø2.
9.
(Figure 15) Secure the bag corners around the lower hopper side tubes by snapping the bag flaps to
the bag bottom on both sides.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
13
15
FLAP
Seite - 10 -
14
Advertisement
