Programmable Switch Reference - Icom IC-F30 Instruction Manual

Push and hold [Pl.
• While pushing [Pl, keys and switches can be accessed normally.
• Release [P] to return to the "locked" condition.
~
CUSTOM PROGRAM
Custom programs can be written to meet a wide variety of op-
erating needs.
To activate
a
custom program:
Push [Pl.
• Operation proceeds according to the nature of the program.
<>
MAN DOWN FUNCTION
This function provides a measure of safety when working in
hazardous environments, etc., automatically sending an
emergency signal to your base station. This is particularly
useful if you are accidentally incapacitated, etc. This function
requires the installation of the optional UT-100
MAN DOWN
uNIT-eonsult your dealer for details.
To activate this function:
No action is necessary on your part-an emergency signal is
automatically sent after a pre. . . programmed period in which
the transceiver remains in a horizontal position.
• To deactivate the function, turn the power off, then on again.
Note: Be careful! If your transceiver is programmed with this
function, do not lie it down on its side while the power is
turned on, otherwise an emergency signal will be sent un-
necessarily.
DEALER-PROGRAMMABLE FUNCTIONS
3
• Programmable switch reference
Use this page to record the functions which have been as-
signed to the dealer-programmable switches on your trans-
ceiver. (Use a pencil as your transceiver may be
reprogrammed in the future.)
~Q_--------
Q_---------
~1
_
~---------
~~---------
B
-----------
~-
- - - - -
-
-
-
-
10