Introduction - Pro-X XV-NE User Manual

l
Adjust only according to guides in this user's manual. Unguided adjustment may
damage the unit.
l
When the unit is left unused for a long period of time, disconnect it from power
source. Always disconnect the power cord from power outlet when not using. This
reduces the risk of electric shock or fire.
l
Do not use the unit near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat. Always use the
unit in a well-ventilated area.
l
In case of damage, smoke, unusual smell or other unexpected situations, stop
using the unit immediately and consult your local dealer or PRO-X.
Read following instructions before use
●
Do not move or shake the unit when it is working. Avoid any deformation or inner
damage from impact during handling
l
Always use the unit in a well-ventilated area.
● Do not use the unit in high moisture environment or in somewhere with water
spray.

Introduction

XV-NE is a wireless intercom system for multiple working conditions. It supports up
to 17-party wireless intercom with 1 Base Station and 16 Submachines.
When intercom is enabled on Base Station, Base Station is able to talk to all the
selected submachines, and it receives audio messages from any submachine.
Only one submachine in the system is able to talk at any one time. Selected
submachines are able to receive audio messages from Base Station and other
submachines. Besides, submachines that are not selected cannot receive audio
messages from Base Station and other submachines, and can only talk to Base
Station.
During wireless intercom, Base Station is also able to forward the red/green TALLY
signals to the TALLY light connected to the submachine.
2