Table of Contents
Advertisement
4.
Channel Setting
There are 35 channels from 2 to 36. Enter the channel setting page, and choose
the proper channel accordingly, then press
to exit to complete setting.
5. Scene Voise Level
When the submachine is sending audio signals, it sends person voise and scene
voise together to other receiving devices. Adjust Scene Voise Level to suppress
the scene voise in some degree during audio signal transmitting. The default
setting is Level 0. You can use
to select other levels. (Note: normally there's
no need to change this setting. There may be interrupt during intercom if the
submachine is set on a high scene voise level.)
6. Sound Control Setting
There are two modes for sound control setting, press-to-talk and hold-free.
Choose the mode you want and then press
to exit to complete setting.
9
Advertisement
Table of Contents
