Pro-X XV-NE User Manual page 19

l
Base Station – software on your computer
Install PL2303 device driver on your
computer.
Connect Base Station with computer
through USB-to-serial -port cable.
Launch 1UBsUserCfg.exe software.
Select Prolific USB-to-Serial Comm Port
(COMX) from Serial Link, and click Open.
Turn on the power switch of Base Station,
and wait for the connection between the
software and Base Station.
Select corresponding parameter and click
Set to finish the setting.
l
Submachine – software on your computer
Install PL2303 device driver on your
computer.
Connect Submachine with computer
through USB setting cable.
Launch HdiPtUserCfg.exe software.
Select Prolific USB-to-Serial Comm
Port (COMX) from Serial Link, and
click Ooen.
Turn on the power switch of
Submachine, and wait for the
connection between the software
and Submachine.
Select corresponding parameter and
click Set to finish the setting.
17