Plug Replacement (Uk & Ireland Only) - Worx PROFESSIONAL WU253 Original Instructions Manual

Plug replacement
(UK & Ireland only)
If you need to replace the fitted plug then follow the instructions
below.
IMPORTANT
The wires in the mains lead are colored in accordance with the
following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of this appliance may not
correspond with the colored markings identifying the terminals in
your plug, proceed as follows. The wire which is colored blue must
be connected to the terminal which is marked with N. The wire which
is colored brown must be connected to the terminal which is marked
with L.
Note: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
13 Amp fuse approved
to BS1362
Connect
Blue to N
Brown L (live)
(neutral)
Outer sleeve
Cable grip
firmly clamped
Warning!
Never connect live
or neutral wires to
the earth terminal
of the plug. Only
fit an approved
13A BS1363/A
plug and the
correct rated fuse.
11