Battery Pack; Storage Recommendations; Package Contents; Description (Fig. 1) - DeWalt XR Li-Ion DCD991 Original Instructions Manual

Brushless cordless 13 mm drill/driver/hammerdrill
Hide thumbs Also See for XR Li-Ion DCD991:
Table of Contents

Advertisement

Available languages

Available languages

English
lower Watt hour rating can exempt the pack from
certain shipping regulations that are imposed upon
the higher Watt hour batteries.
Transport Wh rating
EXAMPLE OF USE AND
TRANSPORT LABEL MARKING
indicates 3 x 36 Wh,
meaning 3 batteries
of 36 Watt hours
each. The Use Wh
rating indicates 108 Watt hours (1 battery implied).

Battery Pack

BATTERY TYPE
The DCD991 and DCD996 operate on a 18V Li-Ion
XR and XR FLEXVOLT
battery packs
TM
These battery packs may be used: DCB181,
DCB182, DCB183, DCB183B, DCB184, DCB184B,
DCB185, DCB546. Refer to Technical Data for
more information.

Storage Recommendations

1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat
or cold. For optimum battery performance and
life, store battery packs at room temperature
when not in use.
2. For long storage, it is recommended to store a
fully charged battery pack in a cool, dry place
out of the charger for optimal results.
NOTE: Battery packs should not be stored
completely depleted of charge. The battery pack will
need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack may
show the following pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
10
Have defective cords replaced
immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D
WALT battery packs only with
e
designated D
WALT chargers. Charging
e
battery packs other than the designated
D
WALT batteries with a D
e
may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
Use: Use without transportation cap, Wh
rating indicates 108 Wh (1 battery with
108 Wh).
Transport: Transport with built-in transport
cap, Wh rating indicates 3 x 36 Wh
(3 batteries of 36 Wh).

Package Contents

The package contains:
1 Brushless cordless drill/driver (DCD991)
1 Brushless cordless hammerdrill (DCD996)
1 Li-Ion battery packs (M1, P1, T1)
2 Li-Ion battery packs (M2, P2, T2)
3 Li-Ion battery packs (M3, P3, T3)
1 Kitbox
1 Charger
1 Side handle
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not
included with N-models. Battery packs and chargers
are not included with NT models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.

Description (Fig. 1)

WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
A. Trigger switch
WALT charger
e

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xr li-ion dcd996

Table of Contents