Advertisement
C 2.2.5)
Markers
for alnalogue output
of the spindle
speed
Marker
No.
Function
Signal direction
2004
"0"
means:
'NC-+PLC
2005
The analogue voltage for the spindle
drive is located
in the ramp
"1"
means:
2043
21 04
21 05
21 06
2480
2485
2486
2487
2489
2490
2491
The analogue voltage for the spindle
drive is 0 V
Strobe
signal gear range code
(G-Code)
for S-Analogue
output
1. Bit gear range code for
S Analogue
(Isb)
2. Bit gear range code for
S Analogue
3. Bit gear range code for
S Analogue
(msb)
Feedback
gear range code for
S analogue complete
Status display
and sign of the
analogue output
M 03
Status display
and sign of the
analogue output
M 04
Status display
M 05
Inversion
of analogue voltage.
The polarity
which
has been
determined
by MP172
is reversed.
Spindle
CW for gearchange
Spindle CW for gearchange
PLC --NC
The spindle speed gear ranges are specified
via machine
parame.ters
(MP78 - 85) when
an analogue
output
for
the spindle
speed is selected
(S-analogue
is activated
via machine
parameter
62).
30
Advertisement
