Safety - Alcatel-Lucent 9764 Series Manual

Safety statements
....................................................................................................................................................................................................................................

Safety

General precautions for installation procedures
....................................................................................................................................................................................................................................
WARNING
Failure to observe these safety precautions may result in personal
injury or damage to equipment.

Read and understand all instructions.

Follow all warnings and instructions marked on this product.

Installation and maintenance procedures must be followed and performed by
trained personnel only.

The equipment must be provided with a readily accessible disconnect device
as part of site preparation.

Grounding and circuit continuity is vital for safe operation of the equipment.
Never operate the equipment with grounding/bonding conductor
disconnected.

Before servicing, disconnect power input to reduce the risk of energy
hazards.

If installed in ambient temperatures above 46°C (115°F), this unit must be
installed only in restricted access locations, where access is limited to
qualified service personnel only. The surface of the units can be very hot,
especially the top side of the RRH. The unit shall not be touched without
safety gloves and it shall be cooled down before touching.
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
1-4