Table of Contents
Advertisement
Issue
No response while long pressing down
arrow after connected with a power
supply
No response while pressing up
arrow/down arrow after connected with a
power supply
Rising in a low speed
The motor does not move as instructed
Goes down but not goes up
Downward sliding
Frequently repositioning
Overwork (Duty cycle: Maximum 2
minutes on/18 minutes OFF)
Height adjustment range limited
When the LED shows "
height to carry out a reset.
If the LED display shows "E01" or "E02", wait 18 minutes and retry.
If the "▼" button doesn't work, check the cable connection and disconnect power
for at least 10 seconds, reconnect power and restart.
If the issue persists, contact Kogan.com.
SPECIFICATIONS
Steps to Resolve
1. Ensure all cables are connected well.
2. Contact Kogan.com.
1. Ensure all cables are connected well.
2. Contact Kogan.com.
1. Check if overloaded.
Maximum loading: 70kg.
2. Contact Kogan.com.
1. Contact Kogan.com.
1. Reposition.
2. Contact Kogan.com.
1. Check if overloaded.
Maximum loading: 70kg.
2. Contact Kogan.com.
1. Check if overloaded.
Maximum loading: 70kg.
2. Contact Kogan.com.
1. Turn off and restast after 18 minutes.
2. Contact Kogan.com.
1. Press "M" and "3" together for 3 seconds to
restore factory settings: it will beep to confirm.
2. Contact Kogan.com.
", press "▼" button until the desk reaches the lowest
Advertisement
Table of Contents
