Safety Measures - Vitek VT-1258 B Manual Instruction

ENGLISH
IRON VT-1258 B
The• iron• is• intended• for• ironing• clothes• and•
bedding•and•for•vertical•steaming•of•fabrics.
DESCRIPTION
Water•spray•nozzle
1.•
Water•inlet•lid
2.•
Continuous•steam•supply•knob
3.•
Burst•of•steam•button
4.•
Water•spray•button•
5.•
Pilot•lamp•of•the•heating•element
6.•
Temperature•control•knob
7.•
Power•cord•protection
8.•
Base•of•the•iron
9.•
Water•tank
10.•
Soleplate
11.•
"SELFCLEAN"•self-clean•button
12.•
"MAX"•water•level•mark
13.•
Beaker
14.•

SAFETY MEASURES

Before•using•the•unit,•read•this•instruction•man-
ual•carefully•and•keep•it•for•future•reference.
Use•the•unit•for•intended•purposes•only,•as•speci-
fied•in•this•manual.•Mishandling•the•unit•can•lead•
to• its• breakage• and• cause• harm• to• the• user• or•
damage•to•his/her•property.•
• Before•switching•the•unit•on,•make•sure•that•
the•voltage•in•your•mains•corresponds•to•the•
unit•operating•voltage.
•
The•power•cord•is•equipped•with•a•"europlug";•
plug•it•into•the•socket•with•a•reliable•ground-
ing•contact.•
•
To•avoid•risk•of•fire•or•electric•shock,•do•not•
use•adapters•for•plugging•the•unit•in.
• To•avoid•mains•overloading,•do•not•switch•on•
several•electrical•appliances•with•high•power•
consumption•at•a•time.
•
Do•not•fill•the•water•tank•with•scented•liquids,•
vinegar,• starch• solution,• descaling• reagents,•
chemicals•etc.
•
Do• not• let• the• power• cord• be• on• the• ironing•
board•and•touch•hot•surfaces.
•
Do• not• leave• the• unit• unattended.• During•
breaks• in• operation• put• the• iron• on• the• base•
(in•vertical•position).
• Before•plugging/unplugging•the•iron,•set•the•
temperature• control• knob• to• the• minimum•
position• and• switch• the• continuous• steam•
supply• off.• Always• unplug• the• iron• when• you•
are•not•using•it.
•
To•unplug•the•unit,•always•pull•its•plug•but•not•
the•power•cord.
IM VT-1258.indd 4
• To• avoid• electric• shock,• do• not• immerse• the•
iron,• the• power• cord• and• the• plug• into• water•
or•any•other•liquids.
•
Before• taking• the• iron• away,• let• it• cool• down•
completely•and•pour•out•the•remaining•water.
•
Clean the unit regularly.
•
Do not immerse the unit body, the power
plug or the power cord into water or any
other liquids.
•
Do not touch the unit body and the power
plug with wet hands.
• Do• not• allow• children• to• touch• the• unit• body•
and•the•power•cord•during•the•unit•operation.
•
Do• not• leave• children• unattended• to• prevent•
using•the•unit•as•a•toy.
•
For• children• safety• reasons,• do• not• leave•
polyethylene• bags• used• as• packaging• unat-
tended.•
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Do•not•attempt•to•repair•the•unit.•Do•not•disas-
semble•the•unit•by•yourself,•if•any•malfunction•
is• detected• or• after• it• was• dropped,• unplug•
the• unit• and• apply• to• any• authorized• service•
center• from• the• contact• address• list• given• in•
the• warranty• certificate• and• on• the• website•
www.vitek.ru.
• Transport•the•unit•in•the•original•package•only.
•
Keep•the•iron•out•of•reach•of•children•and•dis-
abled•persons.
•
Do• not• touch•the• surface•of• the•unit• marked•
with•the•symbol•
Danger•of•burns.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage under
cold (winter) conditions, it is necessary to
keep it for at least two hours at room tem-
perature before switching on.
•
Unpack•the•iron,•remove•the•protection•from•
the•iron•soleplate•(11),•if•any.
• Check• the• unit• for• damages,• do• not• use• the•
iron•in•case•of•damages.
•
Before•switching•the•unit•on,•make•sure•that•
your•home•mains•voltage•corresponds•to•the•
unit•operating•voltage.
•
There may be water residue in the tank,
this is normal, as the iron has passed fac-
tory quality control.
4
while•ironing•and•after•it.•
31.05.2016 9:38:05