Connect; How To Connect Your Philips Nas To Your Network Router - Philips SPD8025CC/05 User Manual

Connect

How to connect your Philips NAS to your network
router
Need help?
Refer to the documentation that came with your router for information about:
The devices that you can connect to your router.
The type of cables that you can connect to your router.
Connect to your network
1. Connect the network cable to your NAS and
to your router
Use the router ports which are mostly labeled 1
2 3 4.
2. Take the power adapter and plug the
connector of the power cable into the
POWER port of the device.
3. Plug the power cable into the adapter and the
power outlet.
4. The NAS will automatically power up.
If the blue LED is not on, press the power button
to switch the NAS on.
LED behavior and buttons
1. Status LED:
On: drive is on
Blinking: please wait as the device needs
some time to start.
Off: drive is off
2. Activity LED
3. On/Low power button
4. Reset button
See also 'Overview
7