How To Install Your Nas On Your Apple Mac - Philips SPD8025CC/05 User Manual

How to install your NAS on your Apple Mac

CAUTION
Never unplug the power cable or data cable when the NAS is still running. This might lead to data
loss.
Always use the power button on the front of your NAS
Need help?
Refer to the documentation that came with your Apple Mac information about:
How to install external devices your Apple Mac
1. Click 'Go' at top of the screen.
2. Choose 'Connect to Server'.
3. Check the label on the back of the NAS for
'NETBIOS'
4. Enter 'smb://' followed by the 'NETBIOS'
name you found in the previous step in the
server address field.
(example : smb://SPD8020-A89205)
5. Click 'Connect' to continue
6. Your NAS will automatically be detected
7. Select 'public' in the drop down menu
8. Click 'OK' to continue
Install your NAS on all computers on your network
that may access the NAS.
9. You may have to enter your network
password.
13