Advertisement
Quick Links
Quick Start Guide for BG-PH2250 Petrol Hedge Trimmer
1. Overview
1.
Cutting blade
2.
Cutting blade safety cover
3.
Safety plate
4.
Front handle
5.
Choke lever
6.
ON/OFF switch
7.
Lubrication nipple
8.
Gears
9.
Fuel pump (primer)
10.
Air filter cover
11.
Starter handle
12.
Rear handle
13.
Throttle lever "release"
14.
Throttle lever
15.
Silencer cover
16.
Tank for fuel mixture
17.
Spark plug boot
18.
Spark plug wrench
19.
Combined oil/petrol cylinder
20. Cutter rail cover
2
19
18
20
6
PLEASE READ ALL INSTRUCTIONS BEFORE USING THE PETROL HEDGE TRIMMER
3
13
6
14
7
1
2
1
13
6
14
15
7 8
4
5
9
8
3
4
11
16
17
5 10 9
12
5
A
9
®
Advertisement
Related Manuals for Gardenline BG-PH2250
Summary of Contents for Gardenline BG-PH2250
- Page 1 ® Quick Start Guide for BG-PH2250 Petrol Hedge Trimmer 1. Overview Cutting blade Cutting blade safety cover Safety plate Front handle Choke lever ON/OFF switch Lubrication nipple 5 10 9 Gears Fuel pump (primer) Air filter cover Starter handle Rear handle Throttle lever “release”...
-
Page 2: Before Starting The Machine
® 1. Before starting the machine 1.1 Fuel and oil Recommended fuels Use only a mixture of normal unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture as indicated on the fuel mixing table. Please note: Do not use a fuel mixture which has been kept for longer than 90 days. Please note: Do not use 2-stroke oil with a recommended mixing ration of 100:1. - Page 3 2. Operation Please note that the statutory regulations governing noise abatement may differ from town to town. 2.1 Starting the engine from cold (Fig. 3-5) ® Fill the tank with the required amount of oil/petrol mix. Set the machine down on a hard, level surface. Set the choke lever (Fig.
-
Page 4: Troubleshooting
® 3. Troubleshooting Possible cause Fault Troubleshooting Correct starting procedure The machine does not start. Follow the instructions for not followed. starting. Sooted or damp spark plug Clean the spark plug or replace it with a new one. Incorrect carburetor setting Contact an authorized customer service outlet.