Placing Accessories; Switching Accessories; Select Panel - Esu CabControl DCC System User Manual

Accessory settings
Figure 42: Accessory settings

12.2.2. Placing accessories

Of course you may now modify the panel to your liking and link more ac-
cessories.
• Touch the desired position for placing the new accessory.
• A list showing all accessories set up on your ECoS will open.
• Select the desired accessory.
• Once you have completed configuring the signal-box, press the "Finish"
button in order to return to the main screen.
Figure 43: Select accessory in panel

12.3. Switching accessories

After successfully configuring the panel all accessories can be switched by
touching the appropriate icon.
• The aspect of two-aspect accessories will be directly changed from one to
the other.
20
• Three or four-aspect accessories: A small window with all possible aspects
opens. Select the desired aspect. The window closes and the accessory will
be switched.
Figure 44: Panel – three-aspect accessory

12.4. Select panel

Similar to the locomotives you may toggle between panels
• Wipe in the area of the panel to the left or to the right in order to select
the respective panel before or after.
• Press the "+" button in order to add a new panel into the quick access
list.
Figure 45: Select panel