Quick Selection; Blocked Locomotive; Edit Locomotive - Esu CabControl DCC System User Manual

Edit locomotives
If you wish to control another (additional) locomotive simply press the "+"
button in order to access the locomotive choice list. Then select another lo-
comotive as described in chapter 11.1. All locomotives are now shown in the
quick access list. If you wish to call up the next locomotive and run it, then
simply wipe to the left or right within the field of the function buttons.
The currently controlled locomotive (class V 100 DB in this example) is dis-
played bright and underlined. Every time you change to another locomotive
the throttle knob will move to the appropriate position to match the loco-
motive speed setting.

11.2.3.1. Quick selection

With the method described you may easily select the next locomotive in the
quick access list by wiping left or right. However, you may also select the
desired locomotive directly.
• Touch and hold the name of the current locomotive in the quick access list
until the quick selection menu appears.
• Choose the desired locomotive directly.
Figure 27: Running locomotives – Quick selection

11.3. Blocked locomotive

When you call up a locomotive it may happen that it may be displayed, but
you cannot control it. In this case the text "Display only" will appear below
the locomotive picture instead of the speed indicator. This means that this
locomotive is currently controlled by another throttle.
In the CabControl Settings you may choose to adjust the "locomotive ta-
keover" settings. This will allow you to "Steal" the locomotive from another
throttle.
***RUNNING LOCOMOTIVES***
Figure 28: BR245– Display only

11.4. Edit locomotive

If you wish, you may edit the characteristics of a locomotive directly with your
Mobile Control II. All changes will also be transferred to the CabControl ICU
and other handsets. First press the menu button at the bottom left and select
"Edit locomotive" from the menu.
Figure 29: Running locomotives – menu button is pressed
In case the locomotive is blocked, then the function is not
available.
After selecting the function, the "Edit locomotive" screen will open.
15