Creating A Consist - Esu CabControl DCC System User Manual

Consists

11.6. Creating a Consist

With the help of this menu you can, "virtually" create consists of multiple
locomotives. After choosing "Create consist" you will be redirected to a new
menu.
Figure 35: Create consist
First of all you can enter a name for the new consist. According to the con-
sist-type you also can choose whether it's a diesel, steam or electric consist
by touching the picture. It will show you the overview of available locomotive
pictures.
Figure 36: Name consist
To add locos to the consist; please press the "plus"-symbol in the upper right
corner of the screen.
18
It will show you the locomotive list where all automatically registered and
manually added locomotives are stored.
Figure 37: Add to consist
After adding a locomotive to the consist you can change the driving direction
or edit this locomotive again, by pressing the small menu-symbol at the end
of the line (behind locomotive name: < >)
Figure 38: Add to consist 2 and 3
Please note:
After adding a locomotive to the consist it will not show up in the locomotive
list again when adding a second or third locomotive. Also a locomotive can
only be added to 1 consist at a time. You must delete the consist before that
locomotive can be added to another consist.