Intermatic MULTIWAVE PE653RC Programming And Usage Instructions
  1. Manuals
  2. Brands
  3. Intermatic Manuals
  4. Control Systems
  5. MULTIWAVE PE653RC
  6. Programming and usage instructions

Intermatic MULTIWAVE PE653RC Programming And Usage Instructions

Pool & spa control system
Hide thumbs Also See for MULTIWAVE PE653RC:
Table of Contents

Advertisement

Quick Links

158--01655
Pool & Spa Control System
Programming and User Guide
For Software Version 3.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MULTIWAVE PE653RC and is the answer not in the manual?

Questions and answers

Related Manuals for Intermatic MULTIWAVE PE653RC

Summary of Contents for Intermatic MULTIWAVE PE653RC

  • Page 1 158--01655 Pool & Spa Control System Programming and User Guide For Software Version 3.4...
  • Page 2 Intermatic 7777 Winn Road Spring Grove, IL 60081 (815) 675-2321 Need Technical help? Phone: 815-675-2321 Fax: 815-675-7001 (8:00 am through 4:30 pm CT, Monday through Friday) Connect with us Intermatic.com 01655 ©2014 Intermatic Incorporated 158--...

  • Page 3: Two-Year Limited Warranty

    If within the warranty period speci ed on the package, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use;...

  • Page 4: Garantie Limitée Deux Ans

    9698. Pour recourir à la garantie, aller à : http://www.intermatic.com ou composer le 815-675-7000. En raison de son attachement constant à la recherche et à l’amélioration de ses produits, Intermatic, Inc. se réserve le droit de modi er, sans préavis, les caractéristiques et le contenu de la présente documentation et décline toute responsabilité pour d’éventuels dommages, directs ou consécutifs, liés au contenu présenté.

  • Page 5: Table Of Contents

    Contents Contents Two-Year Limited Warranty ........3 Garantie limitée deux ans .
  • Page 6 ......40 Removing Z-Wave Devices from a Network ......40 www.intermatic.com...
  • Page 7 Contents Chapter 11: Controlling a PE650 Receiver ....... . 41 Linking the PE953 Controller with PE650 Receiver .
  • Page 8 MultiWave Control System Programming and User Guide NOTES www.intermatic.com...

  • Page 9: Important Safety And Service Information

    Safety Important Safety and Service Information WARNING Risk of Fire or Electric Shock • IMPORTANT SAFETY INSTRUCTIONS, READ AND FOLLOW ALL INSTRUCTIONS, SAVE THESE INSTRUCTIONS • Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing. • This control must be installed according to the National Electrical Code (NEC) and local code requirements. For Canadian installations, section 10 &...
  • Page 10 • Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. • Batteries also contain other chemicals known to the State of California to cause cancer. • Wash hands after handling. www.intermatic.com...

  • Page 11: Informations Importantes Sur La Sécurité Et L'entretien

    Sécurité Informations importantes sur la sécurité et l’entretien AVERTISSEMENT Risque d’incendie ou de choc électrique • INSTRUCTIONS DE SÉCURITÉ IMPORTANTES, LIRE ET RESPECTER TOUTES LES INSTRUCTIONS, CONSERVER CES INSTRUCTIONS • Débrancher l’alimentation au niveau des disjoncteurs ou des sectionneurs avant de procéder à l’installation ou à...
  • Page 12 • Les cosses des piles, les bornes et les accessoires connexes contiennent du plomb et des composés de plomb, des substances jugées cancérogènes et toxiques pour la reproduction par l’État de Californie. • Les piles contiennent aussi d’autres substances chimiques jugées cancérogènes par l’État de Californie. • Veiller à se laver les mains après manipulation. www.intermatic.com...

  • Page 13: Chapter 1: System Overview

    System Overview IMPORTANT: To ensure you have the latest version of the MultiWave software, visit www. intermatic.com to download. The MultiWave Control System brings wireless control to a new level of simplicity. It features push button control and a clear, easy-to-read backlit display panel. This manual provides guidelines and instructions for using and programming the MultiWave Control System.

  • Page 14: Equipment Overview

    1 or 2 heaters and/or a dry contact switch. The dry contact switch can be triggered by any switching device you may provide — light switch, spring wound AUTO/OFF, wireless switch, relay and more. www.intermatic.com...

  • Page 15: Programming - Controller Setup

    Programming — Controller Setup Chapter 2: Programming — Controller Setup NOTE TO USERS: If the Pool & Spa Control System is already programmed, proceed to Chapter 13. Follow the instructions in this chapter to set up the controller: ¸ Installing Batteries in Controller ¸...

  • Page 16: Programming Overview

    Press ENTER repeatedly to walk through the main pages available. Each main page will be identi ed at the top with the component/components it represents. Press P/S and ENTER simultaneously from any main page to access its LEARN MODE. www.intermatic.com...
  • Page 17 Programming — Controller Setup To identify the pool/spa control system’s components: Locate the “MultiWave Pool & Spa Control System Worksheet for Programming” at the back of the accompanying Installation Guide. MultiWave Pool & Spa Control System Worksheet for Programming Solar/Air Other VSP Temperature Antenna...

  • Page 18: Creating A Network

    Press 3 to select INCLUDE DEVICE. With a blunt object, press the INCLUDE button again. Controller displays SUCCESSFUL, then returns to LEARN MODE. 120 V INCLUDE 240 V 2 3 4 5 6 7 8 Include Button Figure 2-5. Include button on the receiver. www.intermatic.com...

  • Page 19: Linking The Controller To Receiver

    SUCCESSFUL, and then returns to the LEARN MODE screen. NOTE: If FAILURE appears at the bottom of the screen, repeat the procedures Resetting the Controller and Resetting the Receiver. If the problem persists, contact Intermatic. Testing Z-Wave Reception ®...

  • Page 20: Remoting The Antenna

    Screw the antenna cap to the bracket with the screws supplied with the remote kit. Remove a knockout for the wire to pass through the dummy cap. Tighten the dummy cap to the top of the receiver with the screws set aside in step 1. Re-apply power to the unit. www.intermatic.com...

  • Page 21: Verifying Firmware Revision Level

    Programming — Controller Setup Verifying Firmware Revision Level Check to see the latest revision numbers at the website, www.intermatic.com. Then verify the controller is updated. Follow this procedure to locate the controller’s current rmware revision numbers. Press and release any button to activate the controller.

  • Page 22: Programming - Pe653 Option Screen

    Press 1 CALIB POOL, 2 CALIB AIR, or 3 CALIB SOLAR to calibrate the temperature setting up to ± 5° F. Press to adjust the displayed temperature and press ENTER to save. The screen displays SUCCESSFUL, indicating the temperature adjustment is saved. www.intermatic.com...
  • Page 23 Programming — PE653 Option Screen Press ENTER to return to the main screen. If necessary, repeat steps 2 through 5 to calibrate another temperature. If your pool/spa system includes a booster pump, follow this procedure to con gure the booster pump and, if applicable, the pump speed (for VSP) that must be active for the pump to operate.

  • Page 24: Configuring A Gas/Electric Heater And/Or Solar Temperature System

    Press P/S and ENTER simultaneously to access LEARN MODE. to scroll to the PE653 OPTION screen. Press Press 5 to select HEATER. Press 3 to select 2ND HTR. Press to enable or disable a second heater and then press ENTER. www.intermatic.com...
  • Page 25 Programming — PE653 Option Screen Press P/S and ENTER simultaneously to access LEARN MODE. to scroll to the PE653 OPTION screen. Press Press 5 to select HEATER. Press 1 to select SOLAR. Press 1 again to select SOLAR. Press to choose between COOLING, HEATING, DISABLED, or BOTH and press ENTER.

  • Page 26: Programming - P5043Me Configuration Screen

    Press ENTER to save and return to the P5043ME CONFIG screen. To continue setting up the circuits, repeat steps 4 through 6 for each circuit desired. From the REMOTE SW CONFIG screen, press to access more choices for the remote switch. www.intermatic.com...
  • Page 27 Programming — P5043ME Con guration Screen To include the pump speed: Press 1 to choose PUMP SPD. Press to choose between the pump speed name (VSP 1, PEN 1, etc.) or DISABLED, and then press ENTER. To include the P/S actuator: Press 2 to choose P/S ACT.

  • Page 28: Programming - Freeze Option Screen

    NOTE: If you have a 1-speed pump, press 1 to circulate water. If you have a 2-speed pump, press 1 for high speed or 2 for low speed. After the circuits are selected, press ENTER to save. www.intermatic.com...
  • Page 29 Programming — Freeze Option Screen NOTE: This procedure applies only to systems with a variable speed pump con gured. Follow this procedure to de ne the speed a variable pump will run when activated for a freeze condition. Press P/S and ENTER simultaneously to access LEARN MODE. Press to scroll to the FREEZE OPTION screen.

  • Page 30: Programming - Variable Speed Pump Options Screens

    1-9, and SPACE) and press P/S to move to the next character. Repeat step 5 as necessary to complete the variable speed name. When the name is complete, press ENTER to save. Repeat procedure to con gure more variable speed names. www.intermatic.com...

  • Page 31: Jandy ® , Hayward ® , Century ® , Marathon ® , And Speck

    Programming — Variable Speed Pump Options Screens Follow the procedure below to con gure the Pentair variable speed pump settings in the controller. Press ENTER to display the VARSPD PEN screen. Press P/S and ENTER simultaneously to access LEARN MODE. Press to scroll to the VSP SPEEDS screen.
  • Page 32 For any brand of variable speed pump besides Pentair, refer to the pump manufacturer’s manual to con gure speeds. For any brand of variable speed pump besides Pentair, refer to the pump manufacturer’s manual to set a maximum speed. www.intermatic.com...

  • Page 33: Configuring Salt Chlorine Generator Options

    Con guring Salt Chlorine Generator Options Chapter 7: Configuring Salt Chlorine Generator Options You must have an AutoPilot Salt Chlorine Generator and the manufacturer’s manual available to complete this procedure. Press P/S and ENTER simultaneously to access LEARN MODE. Press to scroll to the RS485 CONFIG screen.

  • Page 34: Labeling Circuits On Controller And Receiver

    MultiWave Pool & Spa Control System Worksheet for Programming. Labeling the PE653 Receiver Use the peel-and-stick labels from the sheet provided to identify the circuits on the front of the receiver. Refer to the MultiWave Pool & Spa Control System Worksheet for Programming. www.intermatic.com...

  • Page 35: Checking Out And Verifying The System

    Press a button on the controller to access the main screen. If the screen does not activate, contact Intermatic support services. Controller Press a button on the controller to activate the screen.
  • Page 36 Press P/S to activate the actuator valve(s). If the actuator does not activate, check the wiring. Refer to the wiring diagrams in the Installation Guide. Press P/S to activate the actuator valve(s). If the actuator does not activate, contact Intermatic Technical Support. www.intermatic.com...
  • Page 37 Checking Out and Verifying the System Press a button on the controller to activate the screen. Make sure the controller screen displays POOL or SPA in the lower right of the screen. Set the pool or spa temperature to 5 degrees higher than the current reading. Turn the pump ON to activate the heater.

  • Page 38: Programming - Use With Z-Wave Home Control Devices

    Press a controller button (1, 2, 3, 4, or 5) to add a device to a Scene. The screen displays PRESS BUTTON ON DEVICE TO INCLUDE. NOTE: The buttons represent the different Scenes. Press the INCLUDE button on the Z-Wave device to include the device in a Scene. See manufacturer’s instructions. www.intermatic.com...
  • Page 39 Programming — Use with Z-Wave Home Control Devices When a message appears on the controller instructing you to set the device, adjust the device level as needed. NOTE: Device levels enable users to con gure which devices turn ON/ OFF when a Scene is activated. Press the scene number to save the device to the scene.
  • Page 40 BUTTON ON DEVICE TO REMOVE. Press the RESET button on the Z-Wave device. The controller screen displays WORKING followed by SUCCESSFUL to indicate the device is removed from the network. Press ENTER to exit and return to the main screen. www.intermatic.com...

  • Page 41: Controlling A Pe650 Receiver

    NOTE: If the two devices are not successfully linked and you are seeing the word FAILURE at the bottom of the screen, carefully repeat the procedure. If the problem persists, contact Intermatic Customer Service. Press the ENTER button if you wish to return to the main display screen.

  • Page 42: Chapter 12: Advanced Features

    NOTE: In order for the con gured main screen to take effect, allow the controller to move to idle and then re-activate the controller. The new main screen appears. Figure 12-1. Z-Wave Main Screen. Figure 12-2. PE653 Main Screen. Figure 12-3. Variable Speed Main Screen. www.intermatic.com...
  • Page 43 Advanced Features Multiple controllers can be con gured in a MultiWave system. Follow this procedure to con gure additional controllers to your MultiWave system. The rst controller that you con gure is the PRIMARY control and the other controller(s) are SECONDARY control(s).
  • Page 44 WAITING FOR INCLUDE, followed by SUCCESSFUL. The screen then reboots. The controller is con gured as a secondary controller for the third party network. To exclude a MultiWave controller from a third-party network, reset the MultiWave controller. Perform the procedure Resetting the Controller in Chapter 2 “Programming — Controller Setup”. www.intermatic.com...
  • Page 45 Advanced Features Follow this procedure to include the PE653 receiver into another manufacturer’s controller: Activate the manufacturer’s controller INCLUDE function. Press the INCLUDE button on the PE653 receiver. The red ashing LED on the PE653 receiver changes to steady ON. NOTE: The steady ON LED ashes when it is communicating with another device.
  • Page 46 Press the INCLUDE button on the Z-Wave device. The controller screen displays the word SUCCESSFUL to indicate the device is removed from the association. Repeat steps 3 through 5 as necessary to remove other devices from the association. Press ENTER to exit and return to the main screen. www.intermatic.com...

  • Page 47: Chapter 13: User Operation

    User Operation Chapter 13: User Operation Follow the instructions in this chapter to operate the MultiWave Control System: ¸ Using Receiver to Turn Circuits ON/OFF ¸ Using Controller to Turn Circuits ON/OFF ¸ Viewing and Controlling Pool and Spa Temperatures ¸...

  • Page 48: Viewing And Controlling Pool And Spa Temperatures

    Follow this procedure to set the water temperature for your pool or spa. If necessary, press ENTER to access the main display screen. Press to adjust the highlighted temperature. If you have a pool and spa combination system, press P/S to highlight the other temperature and press to adjust. www.intermatic.com...

  • Page 49: Setting Schedules

    User Operation Setting Schedules Schedules are time-based events that can be set to turn a circuit on the receiver ON/OFF or OFF only. The MultiWave enables up to three schedules for each circuit. Press ENTER to access the main display screen. Press and hold P/S.

  • Page 50: Navigating To Other Controls

    Remove the F1 fuse from the receiver and dispose of the fuse. 120 V INCLUDE 240 V 2 3 4 5 6 7 8 Install the new F1 fuse in the receiver. Return power at the breaker F1 Fuse www.intermatic.com...

  • Page 51: Chapter 14: Troubleshooting

    Troubleshooting Chapter 14: Troubleshooting This chapter provides troubleshooting information for the MultiWave system. Follow these guidelines as needed. Symptom Possible Cause Corrective Action The MultiWave controller The controller is idle. Press any button on the controller is not working. to remove it from idle. The controller batteries Replace the batteries.
  • Page 52 Perform the procedure “Con guring 1-Speed or 2-Speed Pump” on page 22. Pump wiring is incorrect. Verify pump wiring. If your variable speed pump is not operating properly, please refer to the troubleshooting guide supplied with the variable speed pump. www.intermatic.com...
  • Page 53 Troubleshooting Symptom Possible Cause Corrective Action After the heater and The time interval for Adjust the cool down interval. pump turn OFF, the pump programmed cool down is not See “De ning the Cool Down remains hot. set properly. Period for the Heater” on page 24.

Table of Contents