Token-Ring Module; Approved Simms - Mitsubishi Electric Apricot LS Pro Using Setup And Installing Add-Ons

Token-Ring module

If your LS Pro was not fitted with a Token-Ring module
and you wish to connect it to a Token-Ring network, your
supplier or service organisation can install the module for
you.
Note
If your LS Pro has a thick wire Ethernet assembly installed
the Token-Ring module will replace the thick wire Ethernet
module.

Approved SIMMs

The Apricot LS Pro system board uses pairs of standard 9-
bit, 1 or 4 Mbyte, 60nS SIMMs. The following list identifies
the SIMMs that have been tested and approved for use in
LS Pro by Apricot.
Capacity
1 Mbyte
1 Mbyte
1 Mbyte
1 Mbyte
4 Mbyte
4 Mbyte
4 Mbyte
Warnings
1. SIMMs not included in the list above cannot be
guaranteed to operate correctly in the LS Pro.
2. SIMMs with gold edge connectors must not be used
in the LS Pro.
28
Manufacturer
Goldstar
Micron Technology
Toshiba
Toshiba
Goldstar
Toshiba
Toshiba
Part No.
GMM-791000NS-60
MT 3D19-6
THM9107OBS-60
THM9107OBS-50
GMM-794000S-60
THM9400OBS-60
THM9400OBS-50