Table of Contents
Advertisement
The ROM chip has a positioning notch which must
correspond with the positioning guide on the socket.
4. Identify the RPL ROM socket and its positioning
guide as shown in the following illustration.
SOCKET
5. Open the protective case which contains the ROM
chip and pick up the chip taking care not to touch
any of the pins.
6
Carefully insert the ROM in the socket with the
positioning notch above the guide in the socket.
Warning
Make sure that you do not bend or otherwise
damage the pins of the chip and that you do not
apply excessive pressure to the Token-Ring
module.
7. Reassemble your computer.
With the RPL ROM installed and the Token-Ring RPL Boot
Device option selected in SETUP, the LS Pro is ready to
remote boot. However, before the remote boot process will
operate, your network administrator will have to reconfigure
the network operating system.
POSITIONING
MARK
SYSTEM
TOKEN-RING
BOARD
MODULE
27
Advertisement
Table of Contents
