Unloading Filament; Changing Filament; Auto Home - Monoprice MP Cadet User Manual

Unloading Filament

On the Main Menu, rotate the Knob until the Auto Retract Filament option is
highlighted, then press the Knob. The Nozzle will heat to the target temperature. Once
the target temperature is reached, the Extruder motor will retract the existing filament.

Changing Filament

1. Perform the steps in the
2. Remove the filament spool from the Filament Holder, then place the new spool on
the Filament Holder.
3. Perform the steps in the

Auto Home

The Auto Home function moves the Nozzle and Print Bed to the "home" positions.
1. On the Main Menu, rotate the Knob until the Prepare option is highlighted, then
press the Knob to enter the Prepare Menu.
2. Rotate the Knob until the Auto Home option is highlighted, then press the Knob.
The Nozzle and Print Bed will move to the "home" positions.
Unloading Filament
Loading Filament
section above.
17
section above.