Adding And Assigning Scan Jobs With Document Capture Pro - Windows - Epson ES-400 User Manual

Note: If you did not install Epson ScanSmart, make sure Epson Scan 2 and either Document Capture
Pro (Windows) or Document Capture (Mac) are installed on the computer connected to the scanner.
Document Capture Pro (Windows) and Document Capture (Mac) do not support scanning from the
start button on your scanner over a wireless network (ES-500W/ES-500WR). Launch Epson Scan 2
before scanning from the
1. Make sure the scanner is connected to your computer or network.
2. Load an original in your scanner.
3. Press the
The scanner starts the job that was assigned to the
(Windows) or Document Capture (Mac).
Note: You can view or change the scan settings using Document Capture Pro (Windows) or
Document Capture (Mac).
Note: If your scanner is connected to one computer via USB and another computer via wireless,
pressing the
computer (ES-500W/ES-500WR).

Adding and Assigning Scan Jobs with Document Capture Pro - Windows

Assigning Start Button Settings or Scan Jobs - Mac
Parent topic:
Related topics
Loading Originals
Adding and Assigning Scan Jobs with Document Capture Pro - Windows
You can view, change, or add available default scan settings when you scan using the
your product. You do this by accessing the scan jobs in the Document Capture Pro program.
Note: The settings may vary, depending on the software version you are using. See the help information
in Document Capture Pro for details.
1. Do one of the following to start Document Capture Pro:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select Document Capture Pro.
start button on your scanner.
start button.
start button on the scanner will save the scanned images to the wirelessly connected
Starting a Scan
and select Epson Software > Document Capture Pro.
start button in Document Capture Pro
54
start button on