Epson ES-400 User Manual page 47

If you are connecting through a direct connection to your scanner, first manually configure your scanner
to connect to your network. Then follow the instructions here to set up your computer for network
scanning using the Epson Scan 2 Utility. Your scanner must be turned on and connected to the network.
Note: Make a note of the IP address or host name of the scanner or the optional Epson Network
Interface Unit so you can enter it in these steps.
1. Do one of the following to start the Epson Scan 2 Utility:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows (other versions): Click
Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
2. Select Settings from the Scanner drop-down list.
You see a screen like this:
Note: If you see an Enable Editing button (Windows) or the lock icon (Mac), click it so that you can
modify the scanner settings.
3. Select your scanner and click Add.
> EPSON > Epson Scan 2 Utility.
or Start > All Programs or Programs > EPSON > Epson
47