Reece Mizu Quick Manual

MIZU
bloc WAll ToP ASSEMblIES
60
52
34
SPEcIFIcATIonS
Recommended use Domestic, hotel and commercial.
colour Chrome
Pressure Rating Maximum continuous operating pressure
1000kPa.
' - 0 1
.
For best performance and longer life we
2 3
recommend 150-500kPa.
4 5
Hot and cold water inlet pressure should be
*
equal.
Temperature Rating Maximum continuous working temperature 80°
Suitable Hot Water Storage Tank: Yes
Units
Continuous Flow: Yes
Gravity Feed: Yes
clEAnIng REcoMMEnDATIonS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty- refer to Warranty Conditions.
TM
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade
WaterMark people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range
without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at
AS/NZS 3718
time of publication however the manufacturer/distributor takes no responsibility for printing errors.
WMKA 02260
Tech Page Version 1
% &
6 7 8 9 : !
" # $
/ ' ( )
* +
@ A '
, (
; !
2015. 1. 10 D
52
34
Dimensions are nominal measurements only.
CT9505803
MIZU BLOC WALL
TOP ASSEMBLIES
- 1 = < = > ?
CT4100
C B C
6 7 8 9 : % &
' - 0 1 !
" # $
. / ' ( )
2 3 * +
4 5 , (
* ; !
2015. 1. 10
To see the complete Mizu range go to
www.reece.com.au/bathrooms
page 1 of 3
@ A ' - 1 = < = > ?
D C B C