Beds And Seating; Leisure Lounge Plus System (Optional) - Leisure Unity 2020 Owner's Manual

APPLIANCE AND EQUIPMENT OPERATION

BEDS AND SEATING

LEISURE LOUNGE PLUS SYSTEM
(OPTIONAL)
LOWERING THE MURPHY BED
1. Refer to the "Slide Out Room" section in the
"Motorhome Operation" section for details.
2. Raise the table , secure in upright position with
1
latch and fold support/small table
3
1
2
3. Ensure lounge chairs are in the fully upright position
using recliner buttons
4
4. Rotate the lounge chairs so they are facing away
from bed by lifting and holding the lock button
76
.
2
3
on the side of the chair.
4
5
while you swivel the seat. Release the lock button
when the chair is slightly rotated to ensure the seat
locks into the next position.
5. Remove the lounge chair seat back cushions and
headrests and fold the seat backs forward until
they lay flat
6
6. Release the locks on both sides of the Murphy bed
(rotate to unlock).
7. Slowly and carefully lower the Murphy bed. Ensure
the Murphy bed locks into place once fully lowered
by lifting slightly on the side of the bed. If bed is
not locked, sit on corner of bed to apply additional
downward pressure.
8. Lower step cover
section in the "Motorhome Operation" section for
details.
7
ᘐ CAUTION
Lower the step cover when lounge chairs
are in recliner mode
accidents. Refer to the "Step Cover" section in the
"Motorhome Operation" section of this manual
for detailed instructions.
5
UNITY MOTORHOME
.
6 6
. Refer to the "Step Cover"
7
to prevent tripping
7