Retracting The Awning; Auto-Retract - Leisure Unity 2020 Owner's Manual

MOTORHOME OPERATION

RETRACTING THE AWNING

1. Ensure the main awning power switch
on the passenger side seat base is set to the "ON"
position.
2. Press the top section of the awning control switch
to retract the awning fully.
2

AUTO-RETRACT

Your awning is equipped with an auto-retract system
that will automatically retract the awning in wind and
rain conditions so long as the main awning switch power
is set to ON. The system works by sensing movement
at the end of the awning, and will retract if a certain
movement threshold is surpassed. This includes, but is
not limited to: wind gusts, heavy rain, excessive rocking
of the motorhome, etc.
NOTE: Do not turn the main awning power switch
while the awning is extended to allow for the auto-retract
system to operate as intended.
56
located
1
1 2
off
1
ᘐ CAUTION
Always place the main awning power switch
the "OFF" position when the awning is not used
and during transit. This prevents the awning from
being accidentally opened.
ᘐ CAUTION
Auto-retract systems provide protection against
adverse elements; but no auto-retract system is a
guarantee against severe or destructive weather;
the effects of wind and rain on an awning are
unpredictable and may cause severe damage to
the awning and/or vehicle. If wind or extended
periods of rain are expected, retract the awning.
ᘐ DANGER
Keep all sources of heat and flame away from
the awning canopy. Fabric is not fire-proof and
can burn if left in contact with any flame or heat
source.
ᘐ CAUTION
The auto-retract system is disabled when the
main awning power switch is in the OFF position.
UNITY MOTORHOME
in
1