Table of Contents
Advertisement
duce torque. The indicator and
3
warning light flashes longer than
the ASC/DTC intervention lasts.
78
This affords the rider visual feed-
back on control intervention even
after the critical situation has
been dealt with.
ASC/DTC self-diagnosis
not completed
ASC/DTC indicator and
warning light flashes slowly.
Possible cause:
ASC/DTC self-diagnosis
z
not completed
The ASC/DTC function is
not available, because self-
diagnosis did not complete.
(The motorcycle has to reach
a defined minimum speed
for the wheel sensors to be
checked: min 5 km/h)
Pull away slowly. The ASC/
DTC indicator and warning light
must go out after a few metres.
If the ASC/DTC indicator and
warning light continues flashing:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
ASC/DTC switched off
ASC/DTC indicator and
warning light comes on.
Off!
Traction control de-
activated.
Possible cause:
The rider has switched off the
ASC/DTC system.
Switch on the ASC/DTC func-
tion (
https://www.motorcycle-manual.com/
107).
ASC/DTC restricted
ASC/DTC indicator and
warning light comes on.
Traction control lim-
ited! Riding at mod.
speed pos. Ride carefully
to next specialist work-
shop.
Possible cause:
The ASC/DTC control unit has
detected a fault.
ATTENTION
Damaged components
Damage to sensors, for example,
which causes malfunctions
Do not transport any objects
underneath the driver or pas-
senger seat.
Secure the toolkit.
Do not damage the angular
rate sensor.
Bear in mind that the ASC/
DTC function is restricted.
Advertisement
Table of Contents
