Table of Contents
Advertisement
ing 2 and spring preload 3 ap-
pear on the display.
The setting shows briefly, then
disappears automatically.
Adjusting the chassis and
suspension
Switch on the ignition (
Press button 1 briefly to view
the current setting.
To adjust damping:
Repeatedly press button 1
briefly until the setting you
want to use appears on the
https://www.motorcycle-manual.com/
display.
NOTICE
You can adjust the damping
characteristic while the motor-
cycle is on the move.
The following settings are avail-
able:
ROAD: Damping for comfortable
84).
on-road mode
DYNA: Damping for dynamic
on-road mode
ENDURO: Damping for off-road
mode. Only available in the
ENDURO riding mode and can
also not be adjusted further in
these riding modes.
OE
with Connectivity
Selection arrow 4 appears on the
display.
The selection arrow 4
disappears after the status is
changed.
OE
with Connectivity
The following settings are avail-
able:
Road: damping for comfortable
on-road riding
Dyna.: damping for dynamic
on-road riding
Enduro: damping for off-road
riding. Available only in the
4
109
z
Advertisement
Table of Contents
