Table of Contents
Advertisement
ENDURO riding mode and not
4
adjustable in this riding mode.
110
with Connectivity
A message is issued if a set-
ting is not possible in the se-
lected riding mode. Example:In
ENDURO riding mode damp.
not adjustable.
z
To adjust spring preload:
Start the engine (
Repeatedly press and hold but-
ton 1 until the setting you want
to use appears on the display.
NOTICE
You cannot adjust spring preload
OE
while the motorcycle is on the
move.
The following settings are avail-
able:
One-up
One-up with luggage
Two-up (with luggage)
with Connectivity
The following message is
displayed if it is not possible
to adjust a setting: Load
adjustment only avail.
158).
stopped.
https://www.motorcycle-manual.com/
with Connectivity
Selection arrow 4 appears on the
display.
The selection arrow 4
disappears after the status is
changed.
OE
Wait for the mechanism to
complete all adjustments be-
fore you ride off.
The settings for damping and
spring preload shown on the
display are automatically ac-
cepted if you allow a certain
length of time to pass without
pressing button 1.
OE
Advertisement
Table of Contents
