Table of Contents
Advertisement
quick-release axle 5 in the
brake caliper and rear wheel.
Make sure that the axle fits into
the recess of the chain ten-
sioner.
Insert right adjustment plate 4.
Install washer 3 and axle nut 2,
but do not tighten the nut yet.
OE
without centre stand
Remove the auxiliary stand.
https://www.motorcycle-manual.com/
Insert the wheel speed sensor
into the bore and tighten
screw 1 to the specified
torque.
Rear wheel speed sensor
to brake-caliper support
Thread-locking compound:
micro-encapsulated
8 Nm
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to delayed
braking effect.
Before driving, check that the
brakes respond without delay.
After completing work, operate
the brake several times until
the brake pads are bedded.
Adjusting chain sag (
Air filter
Removing air filter
Removing the tank cover
(
214).
10
209
222).
z
Advertisement
Table of Contents
