Table of Contents
Advertisement
Removing navigation
device and installing
cover
ATTENTION
Dust and dirt on the
Mount Cradle contacts
Damaged contacts
Always reinstall the cover as
soon as you finish your ride.
Turn ignition key 1 anti-clock-
wise.
Pull the lock retainer 2 all the
way to the left.
Lock 3 is unlocked.
https://www.motorcycle-manual.com/
Push lock 3 all the way to the
left.
The navigation device 4 is un-
locked.
Tilt the navigation device 4
downwards and remove.
Insert cover 1 in the lower sec-
tion and swing to the top with
a rotational movement.
The cover engages with an
audible click.
Push lock retainer 2 to the
right.
Turn ignition key 3 clockwise.
The cover 1 is secured.
Operating navigation
system
NOTICE
The description below is based
on the BMW Motorrad Navig-
ator V and the BMW Motorrad
Navigator VI. The BMW Motorrad
Navigator IV does not support all
the options described here.
NOTICE
Only the latest version of the
BMW Motorrad communication
system is supported. A software
update of the BMW Motorrad
communication system may
be necessary. If this is the
case, consult your authorised
BMW Motorrad dealer.
If the BMW Motorrad Navigator
is installed and the operating fo-
cus is switched to the Navigator
(
125), some of its functions
11
235
z
Advertisement
Table of Contents
