Advertisement
When used in an office environment, this product must be safety-tested yearly by a qualified electrician
(PAT Tested) in order to comply with the Electricity at Work Regulations.
We recommend that it is PAT tested regularly when used in a domestic environment.
Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at
every change of occupancy. For office and retail premises, and buildings such as village halls, the wiring
must be inspected at least once every 5 years. It is recommended that all building be fitted with smoke
alarms (it is mandatory for new buildings).
At time of going to press, the average cost of electricity is £0.15 per unit (kilowatt-hour). The amount you
are being charged will be shown on your electricity bill. At this cost, the EH1826 will cost 14p per day to
run on the highest speed setting.
Before cleaning, turn the appliance off, and disconnect from the mains supply. The appliance may then
be cleaned using a damp cloth with a drop of washing-up liquid to remove any dust or dirt from the case.
Do no use stronger detergents or solvents as these may damage the paint finish.
Using a dry 1" (25mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or and authorised service centre.
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge to the
end-user. When replacing an existing appliance with a similar new appliance your retailer may take the
old appliance for disposal.
Prem-i-Air Appliances Ltd., Lancots Lane, Sutton, St. Helens, Merseyside, WA9 3EX
PAT TESTING
GENERAL SAFETY REQUIREMENTS
OPERATING COSTS
MAINTENANCE
If the mains plug needs to be replaced, proceed as follows:
• Connect the brown wire to the terminal labelled "L".
• Connect the blue wire to the terminal labelled "N".
• Make sure that the cord-grip is positioned correctly (over the outer sheath
of the cable) and it fully tightened.
• If the plug is fitted with a 13 A or 5 A fuse, replace it by a 3 A fuse.
DISPOSAL AND RECYCLING
Website: www.prem-i-air.com
4
Advertisement
