General Safety Requirements; Disposal And Recycling; Product Safety - Prem-I-Air EH1573 User Manual

When used in an office environment, we recommend that this product should be
safety-tested yearly by a qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic
environment.

GENERAL SAFETY REQUIREMENTS

Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory
for new buildings).
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal
is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer
may take the old appliance for disposal.
This appliance can be used by children aged from 8 years and above
•
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children without
•
supervision.
Do not use in close proximity to gas appliances
•
Do not use unless correctly installed.
•
Do not cover when in use.
Do not place the mains lead beneath a carpet or rug.
•
Do not use the appliance in locations where paint, petrol or other flammable
•
liquids are used or stored.
Do no insert any object into the appliance through the grilles. This may
•
damage the appliance or result in overheating or electric shock.
Do not use this appliance in the immediate surroundings of a bath, a shower
•
or a swimming pool.
The appliance is fitted with an overload cut-out which will operate if the motor
•
overheats or is stalled. If this happens, disconnect from the mains supply
immediately, and allow the motor to cool down.
2839
PAT TESTING

DISPOSAL AND RECYCLING

PRODUCT SAFETY

4
Ver. 2 - 04/14