Adjusting The Auxiliary Inputs; Stereo Line Outputs; Adjusting The Stereo Line Outputs; Digital Reverberation - Rodgers 835 Manual

When using these input jacks, audio signals from other sound generating devices like
synthesizers, MIDI sound modules, and tape players are mixed into the organ's main audio
system. A series of Console Display menu controls is used to adjust the characteristics of the
Auxiliary Input sound.
 ADJUSTING THE AUXILIARY INPUTS:
1. Press and hold the SET piston.
Turn the Select Knob counter clockwise (left) to "AUXILIARY", and place the
2.
cursor on the top line.
3. Release SET.
4. Rotate the Alpha Dial to select the desired control.
5. Turn the Select Knob clockwise (right) to place the cursor on the bottom line.
6. Rotate the Alpha Dial to obtain the desired effect. Note: An Audio Save may be
performed to save this setting as the default. Please refer to the "Audio
Save"section.
The Rodgers 835 is equipped with stereo Line Outputs also located on the Connector
Panel. When using these outputs the divisions of the organ (Great, Swell and Pedal) are heard
in stereo. There is no specific channel assignment (left or right) given to these divisions. The
volume may be adjusted by performing the following procedure:
 ADJUSTING THE STEREO LINE OUTPUTS:
1. Press and hold the SET piston.
Turn the Select Knob counter clockwise (left) to "LINE OUT GAIN".
2.
3. Release SET.
4. Rotate the Alpha Dial to adjust the volume .
Note: An Audio Save may be performed to save this setting as the default. Please refer to
the "Audio Save"section.
The Rodgers 835 features an internal digital reverberation system. The volume, length
and type of reverberated sound can be individually changed. Any changes made to the
reverberation settings from this menu are temporary and are lost when the organ is turned off,
unless they are saved by performing the Audio Save procedure. Note: An Audio Save may be
performed to save this setting as the default. Please refer to the "Audio Save" section.
Note: On some early 835 instruments, the only adjustable setting is reverb volume.
Reverb time may be adjusted by an authorized Rodgers representative.

STEREO LINE OUTPUTS

DIGITAL REVERBERATION

24