Advertisement
C6
7. ALARMS ON THE DISPLAY
ALARM
C7
C3
C2
C1
8. TROUBLESHOOTING
Below is a list of possible malfunctions.
If the problem cannot be resolved using the proposed solution, contact the Service Centre.
PROBLEM
C5
The appliance does not work
The appliance is operating in dehu-
midifying mode but the humidity does
not decrease
C4
CAUSE
The tank (A6) is missing or incorrectly
positioned
The tank is full
CAUSE
the appliance is not plugged in
there is no current
the tank is full of water
the tank is incorrectly positioned
The filter is clogged
Either the temperature or the humidity in
the room is too low
SOLUTION
B4
Put correctly the tank back in place (see par. "3.1
Draining into the tank"
Empty the tank (see par. "3.1 Draining into the tank")
B5
Contact Customer Care
B4
B3
B5
B2
B3
B6
B2
B1
B6
B1
13
SOLUTION
plug into the mains
check the power supply
position the tank correctly
Clean the dust filter or nano silver filter
(par. "4.2 Cleaning the dust filter")
In certain conditions it is normal for the
appliance not to dehumidify: check the
operation limits of the appliance (see chap.
"6. Technical specification"). In certain cases
it is advisable to heat the room you wish to
dehumidify.
Advertisement
