Fluke FI-3000 FiberInspector Pro User Manual page 18

A
C
The image will be too dark to analyze if you use a UPC
tip on the probe to inspect an APC endface.
16
B
Figure 9. How to Adjust the Image
A
To zoom in or out or to
move the image, use the
finger gestures supported by
your device.
B
To quickly go back to 1:1
magnification, tap Center.
C
To focus the live image,
press
tap AF Auto Focus on your
mobile device, or use the
focus controls.
C
If you turn on the Auto
Focus before Test setting,
the probe focuses the image
when you press
D
Test. To change the setting,
M
tap
D
To see the high-resolution
image that the probe
analyzes for test results, tap
Test
.
Note
on the probe,

 or tap
then tap Settings.
CL09.EPS