Fluke FI-3000 FiberInspector Pro User Manual page 11

Connect the Probe to Your Mobile Device
See Figure 4.
1. Hold down
2. Open the F
3. On the Live View screen, tap the Wi-Fi button.
4. In the list of Wi-Fi hotspots, tap "FI-3000_xxxxxxxx", where
"xxxxxxxx" is the serial number of the probe.
5. Enter the probe's password: 1234567890.
6. When the probe is connected, the probe's SSID shows in green
text on the Wi-Fi button.
If the mobile device disconnects from the probe, tap the Wi-Fi
button to reconnect.
The password is the same (1234567890) for all
probes. You cannot change the password.
If your mobile device shows a message about no
internet access, choose to stay connected to the
probe.
If your mobile device has a VPN connection, you
must disconnect it before the device can connect to
the probe.
Some mobile devices disconnect from the probe if
you do not use the probe for several minutes.

for 2 seconds to turn the probe on.
-I
app on your mobile device.
i n
Note
9