Advertisement
Step 3. Remote login
To access the camera from a computer on the LAN:
1.
Log into the operating system as a user with administrative privileges.
2.
Open the Microsoft Internet Explorer browser on your compute and enter the IP address of the
In the login window, enter a User Name and Password with Administrator privileges in the
3.
appropriate fields, then click Login. The default User Name and Password for cameras is
admin and
4.
If the password you enter for your camera is a weak password, the following pop-up window will
appear. Follow the instructions to create a "strong" admin password.
recommends using strong passwords in all of your surveillance devices. Strong passwords
have a minimum of 8 characters with upper case and lower letters, numbers and special characters.
NOTE
And we recommend you reset your password regularly, especially in high security systems. Resetting
the password monthly or weekly will better protect your security system from hackers and criminals.
5.
If this login is the first login to a camera from your computer and browser, continue with the
following sub-steps to install a plugin:
a.
After a successful login to the camera, a message will appear in the middle of the Live View
window requiring you to load a plug-in. Click on the message to continue.
When the following screen appears, click Run to download the plug-in (WebComponents)
b.
and continue.
When the following screen appears, click Run to install WebComponents.
c.
d.
Allow the plug-in installation to complete. When the following window appears, click
Finish.
Advertisement
